Fixed device: When push stretcher into the ambulance, the bar between guide wheel will be locked by two hook of device, and rear bar will be locked by rear fixed device. (Figure 6, Figure7).
Warning: Before use the Fixed Devices of the stretcher, make sure the devices is not loosening. Must confirm the screws are tight and safety fixed before using. Follow the instructions and familiarize with the correct operating and then transport the patients.
Unloading from the ambulance: first, unlock rear fixing device (figure 8), slowly pull out the stretcher from the ambulance, the rear leg support will automatically open, when it touch the ground and stand stable, continue to pull the stretcher until the front legs automatic open and stand stable.
There are two methods to install the fixed device:
Method 1: Install the device on the ambulance floor directly: use 6pcs M8 screw and 6pcs M8 nut, install the device on the base;(Figure13)
Method 2: Install the device on the stretcher platform as method 1, then use 6pcs M8 screw install the platform on the ambulance floor. (Figure 14)
Figure 13 Method 1(installed on ambulance floor directly)
Figure14 ,Method 2 ( Install on stretcher platform)
EN
